Tips From the Moving Business Pros: How to Move a Pinball Device



With pinball making a big renewal throughout the country, Gentle Giant desires to make certain that these classic, gorgeous makers remain damage-free while being transported. Oh, and we want the individuals moving them to be safe, too.

Initially glance, pinball devices can appear daunting to move due to the fact that of their size, fragility, and weight. Fortunately, our proficient Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

The majority of modern-day pinballs (made in the last Twenty Years or so) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either 2 or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.

Later on machines have hinges and use a latching system to keep the headbox upright. There might likewise be 2 bolts inside as added safety, in case the latch is broken or inadvertently un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball makers, you need to remove the headbox rear access panel to get to the bolts and plugs within. Generally this panel has a lock on it to keep it in place, but in time the secret might have been lost. On a regular basis, there is a screw keeping this panel in place.

Once inside, eliminate the bolts and disconnect the big connectors that have wiring going down into the device. You might wish to label these ports to put them back in the best area, however they should be different sizes, making it challenging to plug back improperly.

You can now eliminate the headbox entirely, or fold the headbox down onto the playfield glass. Make certain you use some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will help keep the back glass in place.
Early Strong State Pinballs

For early Strong State Pinballs, you will require to get rid of the back glass. There is a lock located on the headbox in one of 3 places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.

As soon as opened, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), and after that pull it out from the bottom.

Then, open up the back box light panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to lift up the lamp panel in order to swing it open.

Now that you are inside, you can eliminate the bolts, and any plugs that have wires decreasing into the device. You might wish to identify these plugs to put them back in the ideal area. You might not have to remove the plugs, as the wiring ought to be long enough to enable the headbox to be folded down.

At this point, you can lock up the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern moving specialty items Modern pinballs, there is a turnable lock system situated at the back of the headbox. Utilizing the provided secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the machine. This is a simple setup and requires no tools.

If you can now fold down the head box onto the cabinet, you're done. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

You require to get within if you can not fold the head box down. There is a lock situated at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will need to remove the display panel. (Some newer Williams and Bally pinballs do not have a separate amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Remove the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.
Getting rid of the Legs.

Pinball Device legs are held in place by eight bolts. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into.

But these captive nuts and threaded plates can be damaged, and making use of extra nuts may have been required. If this holds true, you will require to open up the front door of the pinball, slide out the playfield glass, and lift up the playfield.

With the front door (coin door) open, move the lock down bar latch across and remove the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise the playfield by putting your hand where the ball drains, and lift the playfield up.

You ought to now have access to any nuts that may have been used. As soon as any nuts have actually been gotten rid of, change the playfield glass and lock down bar, and lock the front door.

Make sure to mark or keep in mind which legs are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.

You are now ready to carry your pinball maker. Prior to you pack it, ensure you eliminate the pinballs so they don't bounce around during transport.

If you are moving the pinball utilizing a van or SUV, it might be simpler to remove the legs just prior to filling the maker. Get a buddy to have and help one of you supporting the pinball, while the other gets rid of the front legs.

Make certain you strap the pinball in, as you do not desire it moving if you have to stop suddenly!

For Electro-Mechanical pinball machines, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs inside. (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it might be simpler to eliminate the legs just prior to loading the maker. Get a pal to help and have one of you supporting the pinball, while the other gets rid of the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *